Safety Alert - Jeio tech Lab Companion SK-300 Operating Manual

Safety Alert

Check the voltage, phase and capacity on the ID plate before installation. Sources

of electricity should be separately wired.
The sources of electricity should be grounded.

The sources of electricity without ground connection can cause serious damage to
users or the machine. Don¡t earth the machine to gas pipes or water pipes.
Do not install the machine near to places where inflammable gas can be leaked.

Do not use the machine near to places where explosion can be happened due to
organic evaporating gases.
Explosive materials: Acid, Esther, Nitro compound
Inflammable materials: salt peroxides, inorganic peroxide, salt acids
Put off the power plug if some sounds and smell, smokes are happened.

Do not expose the machine in direct sunlight.

Do not use the machine at places where moisture is high and flooding can be

happened.
Do not disassemble or fix, change the machine.

Check if there is big vibration while the machine is operated.

Check ¡Troubleshooting¡ on the manual.
At least 2 persons should move the machine when it is necessary.

The weight of the machine is about 24 ~ 50kgs. Please use other devices to move
the machine.
¡Alert¡ shows that users can be dead or
seriously wounded by wrong operation.
Page 15