Table of Contents
Advertisement
PROGRAMMING INSTRUCTIONS
Center of CECILWARE LOGO
PUSH
PUSH
PUSH
PUSH
MODES OF OPERATION
1. Initializing Mode – This mode is only active during the first few seconds after a "power-on" or system reset. The main function of this mode
is to configure the system using the previously saved operating parameters.
2. Normal Mode – This mode becomes active immediately after Initializing Mode has completed its tasks. The main functions of this mode are
to monitor and report system status and control dispensing.
3. Rinse Mode – This mode becomes active when the Rinse key is depressed with any dispense key. The main function of this mode is to
allow the operator to initiate an individual Rinse for all mixing chambers.
4. Program Mode – This mode becomes active when the Rinse and the Stop keys are simultaneously depressed for more than 1.5 seconds
while in Normal Mode. The main function of this mode is to provide limited access to frequently used system parameters. Pressing the Rinse
and the Stop keys again will return the touchpad to normal mode.
5.
Service Mode – This mode becomes active when the hidden keys under the "Cecilware Logo" and the "Fast Flow Logo" are
simultaneously depressed for more than 1.5 seconds while in Normal Mode. The main function of this mode is to allow access to all system
parameters that can be modified. Pressing the "Cecilware Logo" and the "Fast Flow Logo" again will return the touchpad to normal mode.
To access SERVICE MODE – Press simultaneously
To access PROGRAM MODE – Press simultaneously
RINSE
To decrease or increase parameter
LCD WINDOW
PUSH
PUSH
PUSH
PUSH
and
Center of FAST FLOW LOGO
and
LCD WINDOW
CLEAR
PUSH
PUSH
PUSH
PUSH
3
STOP
TECHNOLOGY INSIDE
Advertisement
Table of Contents
