Spinner Installation; Installing The Aileron Servos - Seagull Models PC-9 Assembly Manual

SPINNER INSTALLATION.

Install the spinner backplate, propeller and
spinner cone.
The propeller should not touch any part
of the spinner cone. If it does, use a sharp
modeling knife and carefully trim away the
spinner cone where the propeller comes in
contact with it.
Small weight.
String.
Attach the string to the servo lead and carefully thread it through the wing.
www.seagullmodels.com

INSTALLING THE AILERON SERVOS.

Installing the aileron servo in place using the
same techniques used to flap servo.
INSTALLING THE AILERON SERVOS.
M2 x 12 mm.
Servos.
Small weight.
Small weight.
String.
Aileron
Servo.
Thread.
15