Spinner Installation; Installing The Aileron Servos - Seagull Models T-6A Texan II Assembly Manual

T-6A Texan II
_
CODE SEA 103-USA
M3x15mm.
Epoxy.
Battery.
14
.
of the spinner cone. If it does, use a sharp
modeling knife and carefully trim away the
spinner cone where the propeller comes in
contact with it.
Balsa block.

INSTALLING THE AILERON SERVOS.

M3x15mm.
Installing the aileron servo in place using the
same techniques used to flap servo.
Instruction Manual.

SPINNER INSTALLATION.

Install the spinner backplate, propeller and
spinner cone.
The propeller should not touch any part
Servos.
Small weight.
Small weight.
Thread.
String.