CROSSBAR
MOUNTING
BRACKET
CROSSBAR MOUNTING BRACKET INSTALLATION
Proceed with installation as follows:
Step 1. Route the wires from the ceiling outlet box through
the crossbar mounting bracket center hole. Attach the bracket,
with ground wire and ridges down, to the ceiling fixture out-
let box with the mounting hardware included with the outlet
box.
Tighten the screws firmly by hand only, being careful not to
bend the bracket by over tightening.
CAUTION: To reduce the risk of
personal injury, use only the
mounting hardware provided with
the approved outlet box to install
the crossbar mounting bracket.
CANOPY
HATCH
4
CEILING HARDWARE
WIRE NUT (4)
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
WASHER
CANOPY HARDWARE
CANOPY
ADDITIONAL HARDWARE
2
1
x 8-32 ROUND HEAD
/
4
SCREWS (2)
1 x 8-32 ROUND
HEAD SCREWS (2)
APPROVED
OUTLET BOX
HARDWARE
CANOPY SCREW (4)
CANOPY LOCK WASHER (4)
FLAT WASHER (2)
CEILING FAN
APPROVED
WIRING BOX
RIDGE
SIDE
DOWN
GREEN
GROUND
WIRE