Appendix: Attaching The Optional Grid Unit - Canon CXDI-50G User Manual

Appendix: Attaching the Optional Grid Unit

Attach the optional grid unit to the sensor unit by the procedure indicated below.
NOTE: Structure of grid unit is delicate. Do not drop, knock over, bend, or apply force or
jolt to it. Otherwise, the unit may be damaged.
When the grid unit is not in use, remove it from the sensor unit and store it in a safe
place where it will not fall.
Even if it is not extremely damaged, its characteristics may be changed, which may
cause a problem in image quality.
(1) Blow off the dust on the front and back of the grid unit.
(2) Place the sensor unit horizontally on a table.
(3) Hold the grid unit with both hands and
engage the hooks on the bottom of the
grid unit to the holes on the bottom of
the sensor unit.
(4) Gently set the grid unit over the sensor
unit. A click sound is heard when the
grid unit is locked properly.
NOTE: Ensure that the grid unit is
locked before lifting the sensor
unit. Otherwise, the grid unit
will fall and be damaged.
– 19 –
Hook