±15°C, the handpiece may require maintenance.
second handpiece.
4. Carefully lock the Variable Temperature Control in position by tightening the inner set
screw (closest to front panel).
5. Loosen the outer set screw on the Variable Temperature Control knob (furthest from front
panel) using the Temp. Locking Key (hex key) supplied with the system. Position the
knob with the pointer aligned to match the temperature indicated on the temperature
meter. Secure the knob in position by tightening the outer set screw.
6. Loosen the inner set screw to unlock the Variable Temperature control if adjustment of
operating tip temperature is desired.
Corrective Maintenance
Power Source
Most malfunctions are simple and easy to correct.
Symptom
Probable Cause
No power to
Blown Fuse
system
Handpiece will
Defective Heater
not heat
Power Source Malfunction
Power Source Corrective Maintenance
Handpieces
Please refer to the specific handpiece manual for the "Heater Assembly Checkout Procedures."
Packing List
Item #
Description
1
System Power Supply
2
System Power Supply (Export)
3
PS-90 Handpiece Kit (51W)
4
PS-90 High Capacity Chisel Tip
5
Power Cord, 115V
6
Power Cord, 230V
7
Tip Tool
8
Hex Key, .050
9
Hot Grip Removal Pad
10
Operations Manual CD
Packing List
Spare Parts
Item #
Description
1
Fuse, 1.0 Amp Time Lag (ST 25)
Fuse, 1.0 Amp Time Lag (ST 25E)
2
Optional Under Workbench Mounting Bracket
Solution
Check handpiece using the appropriate handpiece manual.
Replace the fuse (located in the AC Receptacle Fuse
Holder) with one of the same rated value.
Refer to the appropriate handpiece manual
Contact PACE
Part Number
ST 25
Only
7008-0265-01
1
7008-0265-02
0
6993-0199-P1
0
1121-0414-P5
0
1332-0094
1
1332-0093
0
1100-0206
0
1100-0237
1
1100-0307
0
CD5050-0459
1
w w w . e k t
2
Recheck the temperature using a
ST 25 E
ST
25
with
Only
PS-90
0
1
1
0
0
1
0
1
0
1
1
0
0
1
1
1
0
1
1
1
PACE Part Number
1159-0246-P5
1159-0213-P5
1321-0609-P1
. c o m
ST 25E with
PS-90
0
1
1
1
0
1
1
1
1
1