Table of Contents
Advertisement
Safety
Safety Guidelines, English Language
The following are safety precautions which personnel must understand and follow when using or servicing
this product.
1. POTENTIAL SHOCK HAZARD - Repair procedures on PACE products should be performed by
Qualified Service Personnel only. Line voltage parts may be exposed when the equipment is
disassembled. Service personnel must avoid contact with these parts when troubleshooting
the product.
2. To prevent personnel injury, adhere to safety guidelines in accordance with OSHA and other
applicable safety standards.
3. SensaTemp handpiece heaters and installed tips are hot when the handpiece is powered on and
for a period of time after power off. DO NOT touch either the heater or the tip. Severe burns
may result.
4. PACE Tip & Tool Stands and handpiece cubbies are designed specifically for use with the
associated handpiece and houses it in a manner which protects the user from accidental burns.
Always store the handpiece in its holder. Be sure to place the handpiece in its holder after use
and allow to cool before storing.
5. Always use PACE systems in a well ventilated area. A fume extraction system such as those
available from PACE are highly recommended to help protect personnel from solder flux fumes.
6. Exercise proper precautions when using chemicals (e.g., solder paste). Refer to the Material
Safety Data Sheet (MSDS) supplied with each chemical and adhere to all safety precautions
recommended by the manufacturer.
10
Advertisement
Table of Contents
