Install The Lens; Connect The Ethernet Cable - Cognex In-Sight 5000 Series Installation Manual

Install the Lens

1. Remove the protective film covering the threaded lens opening, if present.
2. Attach a C-Mount lens to the vision system. The exact lens focal length needed depends on the working distance
and the field of view required for your machine vision application.
3. If using a lens cover, remove the thread guard and attach the lens to the vision system.

Connect the Ethernet Cable

1. Connect the Ethernet cable's M12 connector to the vision system's ENET connector.
2. Connect the Ethernet cable's RJ-45 connector to a switch/router or PC, as applicable.
6
Figure 2-1: Install the Lens
Figure 2-2: Connect the Ethernet Cable