Accessories; Cables - Cognex In-Sight 5000 Series Installation Manual

Accessories

The following optional components can be purchased separately. For a complete list of options and accessories, contact
your local Cognex sales representative.

Cables

Note: Cables are sold separately.
CAUTION: All cable connectors are "keyed" to fit the connectors on the vision system; do not force the connections
or damage may occur.
Ethernet Cable
The Ethernet cable is used to connect the vision system to other network devices. The pin-outs for the cable are listed in
the Ethernet Cable Specifications on
Table 1-3: Ethernet Cables
Length Standard Part #
0.6 m CCB-84901-1001-00
2 m CCB-84901-1002-02
5 m CCB-84901-1003-05
10 m CCB-84901-1004-10
15 m CCB-84901-1005-15
30 m CCB-84901-1006-30
2
page 21. This cable is available in the lengths and styles listed below.
Figure 1-1: Ethernet Cable
45-Degree Key Right-Angle Part #
N/A
CCB-84901-6005-02
CCB-84901-6001-05
CCB-84901-6002-10
CCB-84901-6003-15
CCB-84901-6004-30
135-Degree Key Right Angle Part #
N/A
CCB-84901-7005-02
CCB-84901-7001-05
CCB-84901-7002-10
CCB-84901-7003-15
CCB-84901-7004-30