I/O Module Cable Specifications - Cognex In-Sight 5000 Series Installation Manual

I/O Module Cable Specifications

The I/O Module cable connects the vision system directly to a compatible In-Sight I/O module via the DB15 connector.
When the I/O module is used, all power and communication lines used by the vision system are connected using the I/O
Module cable.
Table 3-10: I/O Module Cable Pin-Out
P1 Pin#
1
2
3
4
5
6
7
8
Note:
Cables are sold separately.
l
Access to the encoder inputs on the In-Sight 5604 Line Scan are not supported by the CIO-MICRO or CIO-
l
MICRO-CC I/O module.
Refer to your specific I/O module installation manual for more connection information.
l
Signal Name
+24VDC
TRIGGER+
TRIGGER-
HS OUT 0
HS OUT 1
RS-232 RECEIVE (RxD)
(In-Sight 5604 Only: Encoder A)
RS-232 TRANSMIT (TxD)
(In-Sight 5604 Only: Encoder B)
24V COMMON
Specifications
P2 Pin#
1
2
3
4
5
6
7
8
23