Regulations/Conformity - Cognex In-Sight 5000 Series Installation Manual

Regulations/Conformity

Note: For the most up-to-date regulations and conformity information, please refer to the In-Sight online support
site: http://www.cognex.com/Support/InSight.
Cognex Corporation
Manufacturer
One Vision Drive
Natick, MA 01760 USA
Declares this -marked Machine Vision System Product
In-Sight 5100/5110/5400/5410: Type 821-0034-1R
Product Type
In-Sight 5100C/5400C: Type 821-0036-1R
In-Sight 5401/5411: Type 821-0035-1R
In-Sight 5403/5413: Type 821-0037-1R
Complies With 2004/108/EC Electromagnetic Compatibility Directive
EN 55022:2006 +A1:2007 Class A
Compliance
EN 61000-6-2:2005
Standards
COGNEX INTERNATIONAL
European
Immeuble "Le Patio"
Representative
104 Avenue Albert 1er
92563 Rueil Malmaison Cedex - France
FCC Part 15, Class A
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference; and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
KCC In-Sight 5100/5110/5400/5410: CGX-IS5400-01(A)
In-Sight 5100C/5400C: CGX-IS5400-C01(A)
In-Sight 5401/5411: CGX-IS5401-01(A)
In-Sight 5403/5413: CGX-IS5403-01(A)
NRTL TÜV SÜD AM SCC/NRTL OSHA Scheme for UL/CAN 60950-1.
CB TÜV SÜD AM, IEC/EN 60950-1. CB report available upon request.
RoHS Compliant to the latest applicable Directive.
Declaration of Conformity
Safety and Regulatory
iii