5604 Line Scan Vision System Specifications - Cognex In-Sight 5000 Series Installation Manual

5604 Line Scan Vision System Specifications

Table 3-4: 5604 Line Scan Vision System Specifications
Specification
Minimum Firmware Requirement
Job/Program Memory
Image Processing Memory
Sensor Type
Sensor Properties
Maximum Resolution (pixels)
Acquisition
Bit Depth
Lines Per Second
Lens Type
Lens Cover View Port Material
Trigger
Discrete Inputs
Discrete Outputs
Encoder Inputs
Status LEDs
Network Communication
1588 Support
Serial Communication
Power Consumption
Material
Finish
Mounting
Dimensions
Weight
1
The number of image sensor rows are configurable and can be set within the In-Sight Explorer software. Decreasing the number of rows will
increase the number of frames per second acquired by the vision system. Refer to the AcquireImage topic in the In-Sight
for more information.
2
To ensure reliable communication using 1000 BaseT operation, the Ethernet cable must not exceed 75 meters (from the vision system to the
endpoint).
In-Sight version 4.4.3
128MB non-volatile flash memory; unlimited storage via remote network
device.
256MB SDRAM
1-inch CCD
14.3 mm x 14µm active area, 14µm x 14µm sq. pixels.
1024 x 1 (CCD); 1024 x 8192 (up to 8192 lines for full resolution image).
Line Scan integration.
256 grey levels (8 bits/pixel).
1
44K lines per second.
C-mount
Clear plastic with an abrasion-resistant coating on the exterior side.
1 opto-isolated, acquisition trigger input. Remote software commands via
Ethernet and RS-232C.
None built-in. Additional inputs available using a compatible I/O module.
(For more information, refer to
when using an Ethernet I/O system.
2 built-in, high-speed outputs. Additional outputs available using a
compatible I/O module. (For more information, refer to
page 4
.) Unlimited outputs when using an Ethernet I/O system.
2 built-in, encoder inputs for use with a 24VDC signal.
Power, Network Status, Network Traffic, 2 user configurable.
1 Ethernet port, 10/100/1000
protocol. Supports DHCP (factory default), static and link-local IP address
configuration.
Timestamp Resolution: 8ns
Synchronization Accuracy Through Transparent Clock: 5µs
RS-232C when connected to the Breakout Cable or a compatible I/O
module. (For more information, refer to
24VDC ±10%, 600mA maximum.
Die-cast aluminum housing.
Painted/Powder coat (back plate).
Eight M4 threaded mounting holes (four front and four back).
134.4mm (5.29in) x 124.1mm (4.88in) x 61.4mm (2.42in) with lens cover
installed.
53.2mm (2.09in) x 124.1mm (4.88in) x 61.4mm (2.42in) without lens
cover installed.
585 g (20.6 oz.) Lens cover installed, without lens.
5604/5614
I/O Modules on page 4
.) Unlimited inputs
2
BaseT with auto MDIX. IEEE 802.3 TCP/IP
I/O Modules on page 4
Specifications
I/O Modules on
.)
®
Explorer Help file
15