Find Current Room Status - Nortel Meridian 1 Manual

Page 68 of 120 Room Status

Find current room status

553-2311-316 Standard 10.00
— To change the name:
SEt OPtion CAtegory oldname newname <CR>
— To remove a category name without replacing it with a new name, use
zero as the new name:
SEt OPtion CAtegory name 0 <CR>
You can use your terminal to find the current status of guest rooms. The FIND
command allows you to retrieve one DN at a time. If you include a particular
status in your command, you can search for DNs with the status you have
named. After you have retrieved one DN by typing the full command, you can
find the next one simply by typing FInd.
— To find the status of one DN:
FInd STatus dn <CR>
— To find the status of the first DN in a group of consecutive DNs:
FInd STatus dn1 dn2 <CR>
— To find the status of the first DN in the whole system:
Find STatus ALl <CR>
— You may add a status condition at the end of any of the commands above.
For a group of consecutive DNs, the command would be FInd STatus
dn1 dn2 status. Then only DNs with the status you name will be
retrieved.
— To find the next one, type word FInd and <CR>.
June 1999