Nortel Meridian 1 Manual page 40

Page 30 of 120 Using the Background Terminal
553-2311-316 Standard 10.00
— You can turn off more than one display at the same time. For example, to
turn off the display of calls answered and calls being returned to the
attendant:
SEt OPtion DIsplay ANswer REturn OFf <CR>
Note: The word OFf always comes at the end. Also, you cannot turn
displays ON and OFf in the same command.
A typical display message would look like this:
WAKE UP 5006 NONE ATTN ENTR TO 6:45 AT 16:00
Words that may appear are shown in the following list:
ATTN ENTR attendant entry
SET ENTR guest entry
ATTN RETN call returned to the attendant
TERM CHG terminal change
CALL ANS call answered by the guest
SYST BLKD system blocking caused the attendant return
EQPD FAIL a hardware failure caused the return
ATTN DEL the attendant canceled a call
SET DEL guest canceled a call
CHK DEL a room status check-out command canceled a wake-up call
LNG(#) FAIL recording for language number (#) failed or cannot be
accessed
NONE used instead of a time when there is no wake-up time
scheduled
VAWU ANS VIP wake-up call answered by guest
VAWU NOAN VIP wake-up call not answered by guest
VAWU CANC VIP wake-up call canceled by attendant
June 1999