Set Automatic Control Of Room Cleaning Status - Nortel Meridian 1 Manual

Set automatic control of room cleaning status

Room cleaning status can be updated in two ways: automatically or by code
entry from the room telephone. The status of all occupied rooms can be
automatically changed to cleaning REquested every day at a particular time.
Between the hours that you specify, cleaning staff can use the room telephone
to signal that the room is being cleaned. When the room telephone handset is
picked up and left off hook, the cleaning status will be changed to cleaning in
PRogress. When the handset is replaced, the room's status will be changed to
CLeaned (no Maid ID is sent). See "Set cleaning status from room telephone"
on page 64 for other methods the cleaning staff can use to change a room's
cleaning status.
— To set the off hook detection period and the automatic change of status
to cleaning REquested:
SEt OPtion TIme DEtect hour1 hour2 <CR>
At hour1, all occupied rooms will be set to cleaning REquested. Between
hour1 and hour2, cleaning status changes are detected from room telephones.
Note: Use a 24-hour clock. Hour2 must be greater than hour1. If no
hour2 is typed, midnight will be assumed.
— To set the automatic change of occupied rooms to cleaning REquested:
SEt OPtion TIme REquest hour1 <CR>
To cancel off hook detection:
SEt OPtion TIme DEtect OFf <CR>
Note: This cancels off hook detection only. It does not affect the
automatic change of cleaning status to cleaning REquested at the hour1
that was originally entered.
— To turn off the automatic change of cleaning status of all occupied rooms
to cleaning REquested:
SEt OPtion TIme REquest OFf <CR>
— To find out which times, if any, are currently set (look for TIME
DETECT and REQUEST in the reply):
(PRint) OPtion <CR>
Room Status
Background Terminal Facility
Page 63 of 120
Description