Set Ready-For-Sale Criteria - Nortel Meridian 1 Manual

Page 98 of 120 Room Status

Set ready-for-sale criteria

553-2311-316 Standard 10.00
A Room Status SEt command using the word SAle will always change the
status of the room(s) you specify to VAcant and PAssed. But you may wish
to make the PRint and FInd commands less strict, so that more rooms are
printed out as being available for sale.
All the possible criteria you can add are listed here.
REquested
PRogress
CLeaned
FAiled
SKipped
OCcupied
— To set ready-for-sale criteria:
SEt OPtion SAle state(s) (ON) <CR>
— To turn off, use the word OFf instead of ON. You can use any states you
require in the command. The word ON or OFf must come at the end, and
you cannot turn items on and off in the same line.
Note: If you do not include any states in the command, all six items will
be turned on or off. For example, SEt OPtion SAle ON <CR> will set
all six items in the list on. (The word ON is not optional in this case.)
— To see what ready for sale criteria are currently set (look for the word
SALE in the reply):
(PRint) OPtion <CR>
For example, you wish to include rooms with cleaning in PRogress or
CLeaned status in the rooms for sale printout:
SEt OPtion SAle PRogress CLeaned (ON) <CR>
Then when you use the command PRint STatus ALl SAle <CR>,
the reply will include all rooms that have status PRogress and CLeaned, as
well as VAcant and PAssed. The command SEt STatus 1205 SAle will still
change the status of that room to VAcant and PAssed.
June 1999