Nortel Meridian 1 Manual page 105

Cleaning status parameters
If automatic cleaning hours are set, the status of any occupied guest room will
be changed to cleaning REquested at the specified time (see "Set automatic
control of room cleaning status" on page 99).
If automatic detection hours are set, the status of any occupied guest room
will be automatically updated to cleaning in PRogress, then CLeaned by the
cleaning staff using the room telephone in the appropriate manner (see "Set
automatic control of room cleaning status" on page 99).
If you use Maid IDs, you can append the Maid ID to a room's cleaning status
from the BGD, or the maid can send it from the guest room telephone when
the cleaning status is changed.
The Maid ID is a one- to four-digit number that should be unique for each
member of the cleaning staff. The Maid ID appears only on Room Status
Display messages, so you must have display messages for room status turned
on at one of your terminals to keep a record of the Maid ID.
To include the Maid ID in a room status Set command:
SEt STatus dn status MI xxxx <CR>
where xxxx is the one- to four-digit Maid ID number.
Note: The Maid ID can only be included with a SEt command that
changes a room's cleaning status.
Class of Service
By changing a telephone's Class of Service, you can restrict guests from
making certain types of calls. There are four levels of restrictions available.
— SCOS (CO OF) (Specified as CO OF in commands.)
— CCOS (Specified as CO in commands.)
— E1
— E2
Room Status
Background Terminal Facility
Page 95 of 120
Description