Display Format Parameters (Part 1 Of 2) - Nortel Meridian 1 Manual

Table 9

Display format parameters (Part 1 of 2)

Item Length
ST source up to 7 characters + one space
(If fewer than 6 characters, the spaces fill before adding the
space)
5402 Up to 7 digits (left justified) with DNXP with NO following space
(If fewer than 7 digits, the spaces fill before adding the space)
Without DNXP , up to 4 digits + 3 spaces (If less than 4 digits,
the spaces are filled)
xxxx 1–4 digits (left justified) + 3–6 leading spaces into column 1
(1 digit has 6 spaces, 2 digits have 5 spaces, etc.)
15 spaces if Maid ID is not equipped, or there is no Maid ID.
Column 1 3 characters + one space
Column 2 4 characters + one space
Column 3 3 characters + one space for padding + one space to line up
Column 4 3 characters + one space (or 4 spaces)
Column 5 3 characters + one space (or 4 spaces)
Column 6 4 characters + one space (or 5 spaces)
Column 7 Up to 9 characters total
One-digit categories have 4 characters + one space +
one space to line up with two digit category, + 2 digit + two
spaces
Two-digit categories have 4 characters + one space + two
digits + two spaces
If no category is assigned, 9 blank spaces are used
Using the Background Terminal
Background Terminal Facility
Page 27 of 120
Start position
0
8
8
8
15
19
24
29
33
37
Description