Using The Print Command For Message Registration (Part 1 Of 2); Table 26 - Nortel Meridian 1 Manual

Table 26

Using the Print command for Message Registration (Part 1 of 2)

Input
Response
(PRint) MEter 9036 <CR>
ROOM METER
(PRint) MEter 1400 1420 <CR>
ROOM METER
ROOM METER
ROOM METER
ROOM METER
You can specify a condition at the end of the PRINT command. Only meters
in the condition you name will be printed. The conditions are listed below.
OFf
ZEro
ALl
DIsplay ON
DIsplay OFf
For one meter:
(PRint) MEter dn condition <CR>
For a consecutive group of meters:
(PRint) MEter dn1 dn2 condition <CR>
For all meters:
(PRint) MEter ALl condition <CR>
9036 3
1402 DISP 1
1408 DISP 3
1412 DISP 6
1418 DISP 2
Message Registration
meters that are turned off
meters with a reading of zero
meters in all conditions, including zero value, and turned
off (normally these are not printed)
meters with their display turned on
meters with their display turned off
Comments
Meter for one DN
The current meter value of DN 9036 is 3.
Meters for a group of consecutive DNs
The current meter value of DN 1402 is 1.
The current meter value of DN 1408 is 3.
The current meter value of DN 1412 is 6.
The current meter value of DN 1418 is 2.
Background Terminal Facility
Page 87 of 120
Description