Using The Set Command To Erase Meters; Table 22 - Nortel Meridian 1 Manual

Table 22

Using the Set command to erase meters

Input
Response
SEt MEter 1432 ZEro <CR>
ROOM METER
SEt MEter 1400 1410 ZEro <CR>
ROOM METER
ROOM METER
ROOM METER
ROOM METER
SEt MEter ALl ZEro <CR>
ATTN METER
ROOM METER
ROOM METER
ROOM METER
1432 DISP 3
1400 DISP 2
1401 DISP 1
1402 DISP 1
•
•
1410 1 TO ZERO
1000 ZERO TO ZERO
1002 1 TO ZERO
•
•
1005 3 TO ZERO
1006 10 TO ZERO
Message Registration
Comments
Meter for one DN
TO DISP ZERO DN 1432 was set to 3 but is now set
to zero.
TO DISP ZERO DN 1401 was set to 2 but is now set
to zero. The others were set to 1 but
TO DISP ZERO
are now set to zero.
TO DISP ZERO
Meter for all DNs
DN 1000 was set to 0 and is
unchanged.
DN 1001 was set to 1 but is now set
to zero.
DN 1005 was set to 3 but is now set
to zero.
DN 1006 was set to 10 but is now
set to zero.
Background Terminal Facility
Page 79 of 120
Description