Settings At Control Unit - Leica M500 OH3 User Manual

Functions in main menu 3
Standard setting
FOCUS ZOOM
SPEED SPEED
48 % 50 %
+/– +/–
• Set focus and zoom speed, magnification and working
distance (see Page 24)
Main menu interface
Dr. Keller
Menue I
Change User
Save actual settings
IPD/Diopter L/Diopter R
Clear error messages
up/down
1 Title line
2 Status line
3 User area
4 Activity line
The control unit is always in the «standard setting»
mode after switch-on. In this mode, the displayed
values can only be checked, not changed. For infor-
mation on changing standard settings, see Page 24.
The title line (1) of the display shows the name of the doctor
whose settings were selected or «standard setting».
The status line (2) indicates the settings which are currently
being edited at the control unit or the main menu which is
currently active.
The user area (3) shows the selection options from which the
user can choose. Exception: error messages and other
information.
The activity line (4) shows the effect of the arrow keys located
below.
MAGNIFI WORKING
CATION DISTANCE
3.0 300
+/– +/–
ok cancel
Leica M500 OH3 / Ref. 10 711 894 / Version -
Activity line
up/down
+/–
ok
save, ok/save
cancel
Reactivating background lighting
If nothing is entered at the control device for one
minute, the display switches to low-power mode and
the background lighting goes out.
➩Press one of the arrow keys or the display key.

Settings at control unit

If a DI C500 module is used, please observe the user
settings for the DI C500 at the control unit in the Leica
1
DI C500/Leica ULT500 user manual/installation
instructions.
2
Calling up name of operating doctor
3
Standard setting
DR. KELLER
DR. SMITH
DR. LEGRAND
DR. DEHMER
4
DR. GRAZZINI
DR. JONES
DR. DUPONT
DR. WATTS
up/down
5
➩Call up main menu 1 with the display key.
➩Select «Change user» in main menu 1 with the arrow keys (5)
and confirm with «ok».
Effect
The pointer in the user area moves up or
down when the arrow keys are pressed.
The selected value increases or
decreases.
The selection at which the pointer is
currently located is called up.
The entered value is saved.
Return to the previous menu field without
saving.
Select user
ok
Operation
cancel
23