Selecting Xyz-Free/Focus-Lock Brakes; Balancing Out The Leica M500 Oh3 - Leica M500 OH3 User Manual

Selecting XYZ-Free/Focus-Lock brakes

➩Pull the selector switch (Item 10, Page 10) and tilt to the
desired brake grouping (XYZ FREE or FOCUS LOCK).
➩Press selector button (1) on handgrip.
The set movements can be made.
1

Balancing out the Leica M500 OH3

Warning
Risk of injury by movements of the microscope during
balancing out.
➩Do not remain in the immediate vicinity of the
microscope during balancing out.
➩Switch on the Leica M500 OH3.
➩Mount accessories in the permissible weight range (see
technical data on Page 43).
➩Move the Leica M500 OH3 to the approximate working
position.
➩Press the ALL-FREE button and position the microscope
carrier so that the line (2) points to A.
➩Lift the protective flap and press the pushbutton (3) for auto
balance.
The pushbutton flashes orange and an audible signal is
emitted for the duration of the balancing procedure.
Leica M500 OH3 / Ref. 10 711 894 / Version -
2
3 4 5 6
Operation
15