Selecting Name Of Operating Doctor At Control Unit - Leica M500 OH3 User Manual

Operation
Selecting name of operating doctor at
control unit
➩Call up main menu 1 at the control unit with the display key.
➩Select the entry «Change user» in main menu 1 with the
arrow keys «up/down» and confirm with «ok».
➩Select the name of the operating doctor with the arrow keys
«up/down» and confirm with «ok».
Select user
DR. KELLER
DR. SMITH
DR. LEGRAND
DR. DEHMER
DR. GRAZZINI
DR. JONES
DR. DUPONT
DR. WATTS
up/down
The dioptre values, eye-base and eyepiece magnification of the
selected doctor are shown in the display.
Dr. Keller
IPD:
Diop. L:
Diop. R:
Eyepiece magnification:
20
ok cancel
65
+ 0.0
+ 0.0
10
ok
Leica M500 OH3 / Ref. 10 711 894 / Version -
➩Set values at the eyepiece/tube.
➩Confirm with «ok» (for information on changing settings, see
the chapter entitled «Changing eye-base, dioptre values and
eyepiece magnification», Page 24).
The values for focus and zoom speed, magnification and
working distance of the selected doctor are shown in the
display.
Dr. Keller
FOCUS ZOOM MAGNIFI
SPEED SPEED CATION
48 % 50 %
+/– +/–
➩For changing the displayed values, see «Setting focus and
zoom speed, magnification and working distance», Page 24.
WORKING
DISTANCE
3.0 300
+/– +/–