Safety Regulations - Unitek BAMOCAR-PG-D3-400/400 Manual

Basic - Information
1.8

Safety regulations

Electronic devices are fundamentally not fail-safe!
Attention high voltage
DC > 800 V
Danger of shock! / Danger to life!
DC link discharge time > 4 min.
This MANUAL must be carefully read and understood by qualified personnel before installation or
commissioning. The knowledge and understanding of the appliance and especially of the safety
instructions must be accessible to all persons involved in the application.
If anything is unclear, or if other functions are not described or not described in sufficient detail in the
documentation, the manufacturer or dealer must be contacted.
Incorrect installation can lead to the destruction of the units! Incorrect
programming can trigger dangerous movements!
Intended use:
The devices of the BAMOCAR- PG-D3 series are electrical equipment of the power electronics for the
regulation of the energy flow.
They are intended as components for controlling EC synchronous motors and AC asynchronous motors
in vehicles, machines or systems.
When used in residential areas, additional EMC measures are necessary.
Deviating applications require the approval of the manufacturer.
The user must prepare a hazard analysis of his end product.
Protection class IP65 (option IP69K).
Connection to batteries only!
Operation only permitted with the unit closed!
Control and power connections can lead to voltages without the
drive operating!
DC link discharge time is greater than 4 minutes!
Measure voltage before disassembly!
Version: 2021 / V2 Page: 8 BAMOCAR-PG-D3-700/250, 400