Commissioning - Unitek BAMOCAR-PG-D3-400/400 Manual

Basic - Information
1.9

Commissioning

The servo amplifiers BAMOCAR-PG-D3-400/400, 700/250, 700/400 are components of electronic drive
technology.
They are only functional in connection with an electrical consumer (e.g. motor).
The use is limited to commercial applications.
In the case of installation in vehicles, boats, machines and systems, the start of the intended operation
of the device is prohibited until it has been determined that the machine, system or vehicle complies
with the provisions of the EC Machinery Directive 2006/42/EC and the EMC Directive 2004/108/EC.
The EC Directive 2004/108/EC with the EMC standards EN61000-2 and EN61000-4 is complied with
under the installation and test conditions specified in the chapter EMC notes.
When used in residential areas, additional EMC measures are necessary.
A manufacturer's declaration can be requested.
Compliance with the limit values required by EMC legislation is the responsibility of the manufacturer of
the vehicle, system or machine.
Version: 2021 / V2 Page: 10 BAMOCAR-PG-D3-700/250, 400