Basic Information; Safety Regulations; Regulations And Guidelines - Unitek Classic Q1 Series Manual

Basic
information

2 Basic information

2.1

Safety regulations

In principle electronic equipment is not fault proof!
Caution - High voltage
Shock hazard! / Danger to life!
Before installation or commissioning begins, this manual must be thoroughly read and
understood by the skilled technical staff involved. If any uncertainty arises, the manufacturer or
dealer should be contacted.
The devices are power electric parts (EB) used for regulating the energy flow in high-voltage
systems.
Protection rating IP00.
The control and power connections may be voltage-carrying
without the axis operating!
Measure the voltage prior to any disassembly!
2.2

Regulations and guidelines

The devices and their associated components can only be installed and switched on where the
local regulations and technical standards have been strictly adhered to.
EU Guidelines
IEC/UL:
VDE Regulations/TÜV Regulations:
Regulations of the statutory
accident insurance and prevention
institution:
Classic Q1
2004/108/EG, 2006/95/EG, 2006/42/EG
EN 60204-1, EN292, EN50178, EN60439-1,
EN61800-3, ECE-R100
ISO 6469, ISO 26262, ISO 16750, ISO 20653, ISO12100
IEC 61508, IEC364, IEC664, UL508C, UL840
VDE100, VDE110, VDE160
VGB4
2