Table of Contents
Advertisement
Line and Trunk Options
8. 15. 121 - Inter-ring Timing
When the Dialer detects incoming ringing, the ringing is validated by measuring the inter-ring
timing. For example, if the standard of incoming ringing is two seconds on and four seconds
off, the inter-ring timing is the time in which a ring burst ends and another one begins. Once
the second ring burst begins, the timer is reset.
Register
121 T
8. 16. 122 - Repeat Call Attempt
The number of retries for a call attempt is programmable, with 15 retries being the highest
number allowed.
Register
122 T
8. 17. 123 - Dialer Operation on Off-hook
The Dialer can be programmed to perform a variety of operations upon off-hook. The
operations are dialling direct, dialling using hot line and dialling using Search Tables.
Register
123 T
Note 1: If 123 = 0, the Dialer will not allow emergency numbers to be dialled, nor will the
Dialer allow
initialisation or MF4 programming.
45
Default
T = 0 for no inter-ring timing T = 5 for 5 seconds
T = 1 for 1 second
5
T = 2 for 2 seconds
T = 3 for 3 seconds
T = 4 for 4 seconds
Default
T = 0 for no retries
T = 1 for 1 retry
T = 2 for 2 retries
#
T = 3 for 3 retries
T = 4 for 4 retries
T = 5 for 5 retries
Default
T = 0 for immediately dial the Default Route defined
by register 124 (hot line operation)
9
T = 8 for active Dialer
T = 9 for inactive Dialer
Description
T = 6 for 6 seconds
T = 7 for 7 seconds
T = 8 for 8 seconds
T = 9 for 9 seconds
Description
6 for 6 retries
7 for 7 retries
8 for 8 retries
9 for 9 retries
for 10 retries
# for 15 retries
Description
8380-383-115-BA
Issue 1, February 1999
Advertisement
Table of Contents
