108 - Dial Tone Delay Timer; 109 - User Dial Tone; 111 - Inter-Digit Time Out For Subscriber Side - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

8. 7. 108 - Dial Tone Delay Timer

This option controls the amount of time following the recognition of an off-hook condition,
when the Dialer will refuse or ignore any user dialled digits. This option can be used to avoid
false digits due to Exchange-relay bounce, etc.
Register
108 T

8. 8. 109 - User Dial Tone

This option controls what the customer will hear when they go off-hook.
Register
109 T
Note: If Register 109 1, then 119 must be set to a 0, 2, 4 or a 6.

8. 9. 111 - Inter-digit Time Out for Subscriber Side

The Inter-digit time out is a specified amount of time that the user is given to enter each dialled
digit (except for calls beginning with 0+ and 00+) before the Dialer will stop accepting the
digits. Each time a digit is dialled, the timer starts over again.
Register
111 T
8380-383-115-BA
Issue 1, February 1999
Default
T = 0 for none
T = 1 for 100 ms
3
T = 2 for 200 ms
T = 3 for 300 ms
Default
T = 1 for internal dial tone
4
T = 4 for dial tone from the Exchange Line
Default
T = 0 for no time-out
T = 1 for 2 seconds
T = 2 for 4 seconds
2
T = 3 for 6 seconds
T = 4 for 8 seconds
T = 5 for 10 seconds
Line and Trunk Options
Description
T = 4 for 400 ms
T = 5 for 500 ms
T = 6 for 600 ms
T = 7 for 700 ms
Description
Description
6 for 12 seconds
7 for 14 seconds
8 for 16 seconds
9 for 18 seconds
for 20 seconds
# for 22 seconds
42