Chapter 1; Smart-1 Euroroute One-Line Dialer Installation; General; Power/Line Led Indications - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

1. SMarT-1 EuroRoute One-line Dialer Installation

1. 1. General

The Dialer is a simple, compact and versatile telephone controller providing the following
features:
• Versatile programming
• One-line capacity
• Abbreviated dialling provision
• Remote maintenance and programming
• Compatible with rotary or MF4 telephones and telephone offices
• EEPROM back-up of Dialer's program
• Separate programming access for customer updating and maintaining of abbreviated
dialling numbers
• Progress tones for call and route progress are programmable on a route by route basis
• Usable with Centrex (PABX) lines
• 300bps modem for remote programming
• Power/line status LED.

1. 2. Power/line LED Indications

The Power/line LED will indicate the following conditions:
Power LED Status
Not illuminated
Green, Continuous
Green, Slow Flashing
Green, Fast Flashing
Orange, Continuous
Red, Continuous

1. 3. Power/line Error Status (LED)

The Power/line error status will be indicated by the following conditions:
LED Pattern
Red, slow flashing
Red, fast flashing
† This condition may be cleared by -initialising the Dialer
8380-383-115-BA
Issue 1, February 1999
SMarT-1 EuroRoute One-line Dialer Installation

CHAPTER 1

No power
Line in use
Line split
Incoming Call
EEPROM writing
Power indication
System fault
Memory fault
Definition
Definition
†
14