Route Peg Counter; Line Peg Counter - Mitel SmarT-1 8380-003-FBCXTX Installation And Programming Manual

6. 12. 1. Route Peg Counter

The Route Peg Counter logs the number of times the route has had successful and unsuccessful
calls. The counter has a log range of 0000-9999. If the counter should reach the range of 9999,
a "rollover" will not occur. The information will remain in the counter buffer until the
command 942 969 is used while in programming mode, or the Dialer is programmed back to
the factory defaults. To view the logged information, while in modem programming mode,
enter the command 967. The counter will not reset when using the command of 967.
Programming with any MF4 instrument is not supported.
V> 967
Route Usage
------ -------
0 0001
1 0001
2 0001
3 0001
4 0001
5 0001
6 0001
7 0001
None 0000
Line Usage
------ -------
1 0002

6. 12. 2. Line Peg Counter

The Line Peg Counter logs the number of times the line has had successful and unsuccessful
calls. The counter has a log range of 0000-9999. If the counter should reach the range of 9999,
a "rollover" will not occur. The information will remain in the counter buffer until the
command 942 969 is used while in programming mode, or the Controller is programmed back
to the factory defaults. To view the logged information, while in modem programming mode,
enter the command of 967. The counter will not reset when using the command of 967.
Programming with any MF4 instrument is not supported.
8380-383-115-BA
Issue 1, February 1999
Fail
-------
0000
0000
0000
0000
0000
0000
0000
0000
0000
Fail
-------
0000
General Notes on Programming
34