Perkins 904F-E28T Operation And Maintenance Manual page 59

M0125147
7. Fill the system with new coolant.
Fluid Recommendations
(General Fuel Information)
• Glossary
• ISO International Standards Organization
• ASTM American Society for Testing and
Materials
• HFRR High Frequency Reciprocating
Rigfor Lubricity testing of diesel fuels
• FAME
• CFR Co-ordinating Fuel Research
• ULSD
• RME
• SME
• EPA Environmental Protection Agency of
the United States
• PPM
• DPF
• v/v (volume of solute)/(volume of solution)
• CFPP
• BTL
• GTL
• CTL
• HVO
General Information
NOTICE
Every attempt is made to provide accurate, up-to-
date information. By use of this document you agree
that Perkins Engines Company Limited is not respon-
sible for errors or omissions.
NOTICE
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
i08327409
Fatty Acid Methyl Esters
Ultra Low Sulfur Diesel
Rape Methyl Ester
Soy Methyl Ester
Parts Per Million
Diesel Particulate Filter
Cold Filter Plugging Point
Biomass to liquid
Gas to liquid
Coal to liquid
Hydrotreated Vegetable Oil
Refer to Perkins Diesel Engines Fluids
Recommendations, M0113102 for additional
information that relates to fuel.
Diesel Fuel Requirements
Perkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
technological societies.
The "Perkins Specification for Distillate Diesel Fuel"
provides a known reliable baseline to judge the
expected performance of distillate diesel fuels that
are derived from conventional sources.
Satisfactory engine performance depends on the use
of a good quality fuel. The use of a good quality fuel
will give the following results: long engine life and
acceptable exhaust emissions levels. The fuel must
meet the minimum requirements that are stated in
the table 13 .
NOTICE
The footnotes are key part of the Perkins "Specifica-
tion for Distillate Diesel Fuel" Table. Read ALL of the
footnotes.
59
Maintenance Section
Fluid Recommendations