Perkins 904F-E28T Operation And Maintenance Manual page 24

Industrial engine
Table of Contents

Advertisement

24
Product Information Section
Product Description
Loose or Off Engine Components
Illustration 19
Typical example
(1) Primary fuel filter, combined with electric
fuel priming pump and Water-In-Fuel
(WIF) switch
Product Description
((Engine and Aftertreatment))
The Perkins 904F-E28T industrial engine is a single
turbocharged engine.
The engine aftertreatment system consists of a
Diesel Oxidation Catalyst (DOC).
Engine Specifications
Note: The front end of the engine is opposite the
flywheel end of the engine. The left and the right
sides of the engine are determined from the flywheel
end. The number 1 cylinder is the front cylinder.
(2) Primary fuel filter, combined with manual
fuel priming pump and Water-In-Fuel
(WIF) switch
(3) If equipped, secondary fuel filter
(4) Electric control module
i08307810
Illustration 20
Typical example
(A) Exhaust valves
(B) Inlet valves
(5) Inlet temperature sensor
(6) Exhaust assembly
(7) Low-pressure fuel line
(8) Link harness
M0125147
g06522084
g06297997

Advertisement

Table of Contents
loading

Table of Contents