Setting The Harrow Tine Down Force; Setting The Disc Depth - Schulte DHX-360 Operator's Manual

OPERATION

9.2 Setting the HARROW Tine Down Force

To increase the down pressure on the harrow sections adjust the spring tension. This is done using the nuts on
the end of the spring tensioner as shown below.

9.3 Setting the DISC Depth

To adjust the depth of the discs use the depth stop on the rear of the center section as shown below. Turn the
threaded handle to set to the depth of your choosing.
By increasing the depth more soil will be moved. By decreasing depth less soil will be moved. Adjust depth to
the desired soil finish for your field.
DHX-360/DHX-600 03/21 Operation Section 4-15
© 2021 Alamo Group Inc.