Tightening Disc Hubs; Pre-Operation Inspection And Service - Schulte DHX-360 Operator's Manual

9.7 Tightening Disc Hubs

Periodically check the tightness of the disc hub stud bolts. A long wrench has been provided for the disc hub
nut. See location of wrench below. The disc hub attachment nut is to be tightened to 260 ft lbs.

10. PRE-OPERATION INSPECTION AND SERVICE

Before each use, a pre-operation inspection and service of the implement and tractor must be performed.
This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped
and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection
reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing
parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time
and repair cost can be avoided. OPS-U-0029
DHX-360/DHX-600 03/21
© 2021 Alamo Group Inc.
OPERATION
Operation Section 4-18