Table of Contents
Advertisement
3. Check all bolts for tightness periodically. Reference provided bolt chart for torque specifications.
4. Keep all tires inflated to 58psi on the DH60, 58psi on the DH36.
5. Check wheel lug bolts after first 4 hours of use
and tighten if necessary (550/45 22.5 tire nuts
tighten to 170ft.lbs., outer wing forklift tires
tighten to 80 ft. lbs.). Inspect tire condition,
wheel bearings and lug nut; torque periodically.
6. Inspect and repack with grease all main tire
hubs yearly.
7. Inspect hubs after every field use for any signs
of damage.
8. The discs are required to be lifted out of the
ground when making turns in the field.
Significant side forces can be generated during
turns which could damage the disc shanks and
discs over a period of time.
9. Ensure all shank nuts are properly torqued to 200 ft. lbs. (front and rear row).
DHX-360/DHX-600
03/21
© 2021 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-3
Advertisement
Table of Contents
