Table of Contents
Advertisement
•
Inspect tire condition, wheel bearings, and lug nut torque (550/45 22.5 tire nuts tighten to 170ft.lbs., outer
wing forklift tires tighten to 80 ft. lbs.).
•
Inspect all bolts and screws and tighten to the recommended torque. (See Maintenance Section)
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
DHX-360/DHX-600
03/21
© 2021 Alamo Group Inc.
OPERATION
Operation Section 4-22
(SG-15)
Advertisement
Table of Contents
