Leveling Procedure; Setting The Implement; Setting The Disc Harrow Tine Angle - Schulte DHX-360 Operator's Manual

8. LEVELING PROCEDURE

• Ensure the implement is parked on level
ground.
• Lower the machine and drive forward slightly to
ensure the harrows are laid back in working
position.
• Lower disc frames until the discs on wing
section are just touching the ground.
• Compare the height of the discs on the wing
sections with the discs on the center section.
• If required, lower or raise the center section
using the adjustment screws.
• Re-tighten adjustment screw hardware once
complete.

9. SETTING THE IMPLEMENT

9.1 Setting the DISC HARROW tine Angle

To adjust the angle of the harrow tines actuate the tine angle hydraulics circuit and observe the angle indicator.
By increasing the indicator number the tine angle will become more aggressive. By reducing the indicator
number the tine angle will become less aggressive. Adjust tine angle to the desired finish for your field.
DHX-360/DHX-600 03/21
© 2021 Alamo Group Inc.
OPERATION
Operation Section 4-14