OPERATION
Before operation check disc blades and disc hubs for breakage or cracking and replace if needed. Ensure
hubs spin freely.
Inspect every 8 hour use.
Inspect all bolts and screws and tighten to the recommended torque - disc bolts to 75 ft lbs and hub bolts to
260 ft lbs.
10.3 Transport Locks
Always install the Transport Cylinder stops on the
Disc Harrow transport wheel before transporting the
Disc Harrow.
DHX-360/DHX-600
03/21
Operation Section 4-21
© 2021 Alamo Group Inc.