Table of Contents
Advertisement
Chapter 5
Configure the Configurable Flowmeter Module
Changing Configuration
Information at the Tags
78
Some configurable features are changed on a module-wide basis and some on
a point-by-point basis.
Configurable Features
There are two ways to change the configuration:
•
Use a pull-down menu.
•
Highlight the value of a particular feature for a particular point and type
a new value.
Pull-down Menu
1. Click the far left side of the Value
column and a pull-down menu appears.
Highlight Value
1. Highlight the value of the feature you
want to change.
2. Type in the valid new value.
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
2. Highlight the point that needs to be changed and
type a valid new value.
Advertisement
Table of Contents
