Table of Contents
Advertisement
Appendix E
Specify the Configurable On/Off Behavior
1. In the CFM_DEMO program, select the Controller Tag folder and view the
Monitor Tags tab.
2. Expand the CFM_B_C tag until you reach the CFM_B_C.OutputWindow
data tags.
3. In the Value column of CFM_B_C.OutputWindow FreqOn and FreqOff
data tags, enter the desired On and Off frequency limits.
See
Table 5 on page 52
Off frequency limits.
IMPORTANT
Test the configuration before implementing the changes into your
production process.
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Configure Output Behavior with RSLogix 5000 Version 16 and Earlier
for more information about determining your On/
133
Advertisement
Table of Contents
