Table of Contents
Advertisement
Appendix E
Specify the Configurable On/Off Behavior
1. In the previously existing program, select the Controller Tag folder and
view the Monitor Tags tab.
2. Expand the CFM_B_C tag until you reach the CFM_B_C.OutputWindow
data tags.
3. In the Value column of the CFM_B_C.OutputWindow data tags, enter
the desired the On and Off frequency limits.
See
Table 5 on page 52
Off frequency limits.
4. Edit existing tag references throughout the project so they link to the
appropriate, newly-added, user-defined tags.
For example, if the tag reference is Local:5:I.Status.FreqAverage, change it to
the corresponding user-defined tag, CFM_IN.Status.FreqAverage.
IMPORTANT
Test the configuration before implementing the changes into your
production process.
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Configure Output Behavior with RSLogix 5000 Version 16 and Earlier
for more information about determining your On/
137
Advertisement
Table of Contents
