Table of Contents
Advertisement
Appendix A
Troubleshooting the Configurable Flowmeter Module
Using Programming
Software to Troubleshoot
Your Module
Warning icon when a
communications fault occurs or if
the module is inhibited
Status section lists Major and Minor
Faults and the Internal
State of the module
Status line provides information on the
connection to the module
A value of 1 shows a fault for this input
point.
104
In addition to the status display on the module, the programming software will
alert you to fault conditions. You will be alerted in one of four ways:
•
Warning signal on the main screen next to the module - This occurs
when the connection to the module is broken
•
Fault message in a screen's status line
•
Notification in the Tag Editor - General module faults are also reported
in the Tag Editor. Diagnostic faults are only reported in the Tag Editor
•
Status on the Module Info Page
The screens below display fault notification in the programming software.
Warning signal on main screen
Fault message in status line
Notification in Tag Editor
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
!
!
Warning signal - The module in slot 1 has a communications fault
Advertisement
Table of Contents
