Using the Default
Configuration
Electronic Keying
When you create a new module, you can choose how specific the keying must
be when a module is inserted into the module's slot in the chassis.
This screen shows the choices available.
For more information, see
If you want to use the default configuration, click Finish as shown. See
to download the default configuration information and begin module
operation.
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Chapter 5
Configure the Configurable Flowmeter Module
Electronic Keying on page
Click here to accept the 1756-CFM module's default
configuration. Go to
page 79
to learn how to
download configuration.
22.
page 79
75