Creating A New Module - Allen-Bradley 1756-CFM User Manual

Chapter 5 Configure the Configurable Flowmeter Module

Creating a New Module

72
After you have started the programming software and created a controller, you
must create a new module. The wizard lets you create a new module and set
communication options.
You must be offline when you create a new module.
IMPORTANT
1. Go offline.
If you are not offline, use this pull-
down menu to go offline
2. Select a 1756-CFM module.
1. Select I/O Configuration.
2. Click the right mouse button to display
the menu.
3. Select New Module
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021