Configuration Structure - Allen-Bradley 1756-CFM User Manual

Configuration Structure

Table 14 - Configurable Flowmeter Module Configuration Tags
Name
C.ProgToFaultEn
C.ChannelCfgBits for Channel 0
C.Ch0ProverDirection
C.Ch1ProverDirection
C.Ch0LowFreqClear
C.Ch1LowFreqClear
C.Ch0PreTrigger
C.Ch1PreTrigger
C.Operations[0].OperationalMode
Software Configuration Tags
This appendix lists these categories of 1756-CFM data structures:
• Configuration - This structure is used to write configuration upon
insertion and to make changes during module operation.
• Input - This structure displays the current operational status of the
module.
• Output - This structure is used to modify module operation and override
the outputs.
You must use the Configuration tags to alter module configuration.
and defines Configuration tags.
Style Data Type
Decimal BOOL
Binary SINT
Decimal BOOL
Decimal BOOL
Decimal BOOL
Decimal BOOL
Decimal BOOL
Decimal BOOL
Decimal SINT
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Definition
Sets outputs to selected Fault state when the owner-controller is in
Program mode.
0 = outputs use Program mode setting
1 = outputs use fault mode settings
Defines the direction of a prover connected to Channel 0.
0 = unidirectional prover
1 = bidirectional prover
Defines the direction of a prover connected to Channel 1.
0 = unidirectional prover
1 = bidirectional prover
Enables the minimum detectable frequency level for Channel 0.
Set the bit to 1 to enable it
Enables the minimum detectable frequency level for Channel 1.
Set the bit to 1 to enable it
Enables the PreTrigger on Channel 0 for full flow.
Set the bit to 1 to enable it
Enables the PreTrigger on Channel 1 for full flow.
Set the bit to 1 to enable it
Sets the module's operational mode.
0 = OFF
1 = Totalizer Mode
2 = Non-Resettable Totalizer Mode
3 = High Resolution Frequency Mode
B
Appendix
Table 14 lists
107