Specification; Set Contents - PowerBox Systems Competition SR2 Instruction Manual

13. SPECIFICATION

Operating voltage
Power supply
Current drain, operating
Current drain, stand-by
Maximum current capacity
Drop-out voltage
Output voltage
Signal input
RC systems supported
Receiver redundancy
Channels
Servo outputs, total
Servo signal resolution
Signal repeat rate
Gyro modes
Gyro sensor type
Number of sensor axes
Telemetry systems supported
Dimensions
Weight
Weight, Sensor-Switch
Temperature range

14. SET CONTENTS

- PowerBox Competition SR2
- TFT-Display
- SensorSwitch
- 2 patch-leads
- 8 retaining screws
- 4 rubber grommets and brass sleeves
- Operating instructions
www.powerbox-systems.com
4.0 V - 9.0 V
2S LiPo, 2S Lilon, 2S LiFePo, 5S NiMH
260 mA
30 µA
2 x 20 A continuous (<30 s: 2 x 40 A)
0.3 V
6.0V, 7.4V, 7.8V, unregulated
Serial
PowerBox, Futaba, Jeti, Spektrum,
M-Link and Hott
SRS
26
22
0.5 µs
10ms, 12ms, 14ms, 16ms, 18ms
Heading mode, Normal mode
External iGyro SAT
12
P²BUS, S.BUS2, EX-Tele, SRXL2,
M-Link, Hott
107 x 69 x 19 mm
115 g
15 g
-30 °C to +75 °C
35