PowerBox Systems Competition SR2 Instruction Manual page 20

Now select Auto Matching. At this moment all the Competition SR2's other out-
puts are switched off, and you will see this message:
Now connect the second and - if present - the third servo to the appropriate out-
puts, and complete the mechanical linkages. Now use buttons I and II to move
the cursor to the sockets to which the servos are connected, and press the SET
button. These outputs now turn grey as auxiliaries. When selected, these outputs
are assigned to the same input channel as the main servo, and initialised. This
means that you do not need to set the assignment of the auxiliaries beforehand
in Output Mapping, and also do not need to initialise them.
For example, if you accidentally select the wrong output, and wish to cancel your
choice, the output will be reset to its previous function.
Once you have completed the selection of the participants, move the cursor to
Start Matching: the matching process commences. If you wish to interrupt the
process, you can do this by pressing the SET button.
The procedure is automatically interrupted if the system fails to detect a mini-
mum current value; for example, if a linkage is overloaded at its end-point, or you
forgot to install it.
20 PowerBox-Systems − World Leaders in RC Power Supply Systems