Specification - PowerBox Systems EVOLUTION Instruction Manual

4. SPECIFICATION

Operating voltage:
Power supply:
Current drain:
Dropout voltage:
Max. receiver/servo voltage: 2 x 10 A (stabilised), according to cooling measures
Servo sockets:
Temperature range:
Dimensions:
Weight:
Sensor-Switch:
EMV approval:
CE approval:
WEEE Reg. No.:
Registered design:
This battery backer fulfils the EMV protective requirements, EN 55014-1:2006
with certificate dated 10th February 2009. EMC approval 2004/108/EG.
The unit must not be connected to a mains PSU!
www.powerbox-systems.com
4.0 Volt to 9.0 Volt
2 x 5-cell NiCd or NiMH batteries,
2 x 2-cell LiFe batteries (A123)
2 x 2-cell LiPo/LiIon batteries, 7.4 Volt
Switched on: approx. 80 mA
Switched off: approx. 4 µA
approx. 0.25 V
Peak 2 x 20 A
16 sockets, 6 channels
-30°C to +75°C
93 x 67 x 19 mm (incl. base plate)
86 g
15 g
EN 55014-1:2006
2004/108/EG
DE 639 766 11
DE 203 13 420.6
9