Table of Contents
Advertisement
1. Safety
1.1. Warning notes
•
Safety notes are intended for the protection of persons and property.
•
Safety notes must be read and observed by every person who works on the product.
•
Warning notes precede activities that pose a hazard for people and the product.
1.2. Symbols used in the manual
Indicates a procedure, condition, or statement that, if not strictly observed, could result in personal injury or death.
Warning
Indicates a procedure, condition, or statement that, if not strictly observed, could result in damage to or destruc-
tion of equipment.
Caution
Indicates that the presence of electrostatic discharge could damage the appliance. When handling the boards,
always wear a grounded bracelet.
Indicates a procedure, condition, or statement that should be strictly followed in order to optimize these applications.
Important
Note !
Indicates an essential or important procedure, condition, or statement.
1.3. Safety requirements
This document contains important information for safe operation of the product.
•
Keep this document and all other applicable documents at the location of use for the entire working life of
the product.
1.3.1. Area of applicability
This document applies only to the product described here.
Other applicable documents
•
International occupational health and safety regulations
1.3.2. Basic requirements for safety
•
All existing safety devices are to be tested regularly in accordance with the maintenance schedule.
•
This document, in particular the chapter entitled "Safety", together with the warnings and all other applicable
documents, must be followed by all persons who work with the product.
•
In addition to this document, the rules at the location of use with regard to environmental protection and the
occupation health and safety and accident prevention regulations must be followed.
•
All safety and hazard warnings on the installation must be kept in legible condition.
•
Safety information and instructions required by law must be displayed to users in such a way that they are
clearly visible.
•
A requirement for safe handling and non-disruptive operation of this product is knowledge of the fundamen-
tal safety regulations.
KFM LD • Instruction manual
5
Advertisement
Table of Contents
